Skip to main content
All CollectionsInstallationGeneral
How to Capture a Clear and Accurate Picture of Your Water Meter
How to Capture a Clear and Accurate Picture of Your Water Meter

Need Help Taking a Picture of Your Water Meter?

Jasmyn Haas avatar
Written by Jasmyn Haas
Updated over a week ago

Capturing an Accurate Picture of Your Water Meter

In order to provide you with accurate water data, Flume needs to capture an accurate picture of your water meter during your installation. It is important that we can read the brand, model, and size of the meter with the picture.

Instructions

  1. Make sure the entire meter face is captured in the image.

  2. Ensure the photo is clear and readable. If there is dirt or debris on the face of the meter, please clean it off before taking a photo.

  3. If your meter does not look like any of the examples below, you may not be looking at your water meter. Please see this article HERE for assistance locating your water meter.

Examples

Below are examples of good meter images where the necessary information is legible.

Questions?

If you have any questions on how to capture the required information to ensure accurate reporting, or need to troubleshoot any issues, please contact our support team by emailing support@flumewater.com.

Did this answer your question?